HYC_50 – Operation and Installation Guide
Hardware
Version 1-2
All rights reserved. Reproduction of this document, in whole or in part, is only permitted with the permission of alpitronic GmbH.
Heavy weight
Please note that the unit or the individual components of the unit can be
very heavy.
Bruises
When assembling and disassembling components, please ensure that no
persons or body parts are bruised.
The main switch for switching off the unit is located in the lower part of
the unit (see Figure 8 and Figure 9). Set the circuit breaker to position "0",
this will switch off all internal components of the HYC_50.
Please note possible discharge times of DC link capacitors.
To Next Page
Loading...
Need help?
General
