Alpitronic hypercharge HYC 50 User Manual

HYC_50 – Operation and Installation Guide
Hardware
Version 1-2
Page 18 of 76
2 Product description
All rights reserved. Reproduction of this document, in whole or in part, is only permitted with the permission of alpitronic GmbH.
2.3. Type plate
Depending on the configuration of the charging station, the following type of plate (example)
may be on the unit.
SN:100123456
IEC 61439-7
Typ
Baujahr
Netzspannung (V)
Frequenz (Hz)
Max. Eingangsstrom (A)
Min.|Max. Ladestrom (A)
Min.|Max. Ladespannung (V)
Max. Gewicht (kg)
HW-Revision
Schutzart
Ladeschnittstelle
Temperaturbereich (°C)
HYC_50
2022
5.6
95
IP55
3x 230 (400)
50-60
90
CCS2
6,5 |150
-30 bis +40 (bis +55 mit Derating)
CHAdeMO
6,5 |125
150|1000 150|500
Made in Italy
alpitronic Srl
Via di Mezzi ai Piani 33
I-39100 Bolzano
by alpitronic
®
Figure 4: Example of a type of plate without calibration conformity for HYC_50

Alpitronic hypercharge HYC 50 Specifications

General

Brand	Alpitronic
Model	hypercharge HYC 50
Category	Battery Charger
Language	English