All rights reserved. Reproduction of this document, in whole or in part, is only permitted with the permission of alpitronic GmbH.
6.2.1. Charging overview ..........................................................................................54
6.3. Stop charging process ............................................................................................58
6.3.1. Wake screen ...................................................................................................58
6.3.2. Stop charging ..................................................................................................58
6.4 Procedure for error messages ................................................................................ 62
6.4.1 Authentication failed ...........................................................................................62
6.4.2 Charging plug defective ......................................................................................63
6.4.3 Error during communication setup ......................................................................64
6.4.4 Connector locking failed ......................................................................................65
6.4.5 The vehicle signals an error ................................................................................66
7. Fault description and correction ..................................................................................... 67
8. Maintenance .................................................................................................................. 68
8.1. Overview of the maintenance work .........................................................................68
8.2. Function test of the main switch .............................................................................68
8.3. Review of the protective measures .........................................................................69
8.4. Checking cleanliness and condensation .................................................................70
8.5. Checking the screws ..............................................................................................70
8.6. Replacing the air filter inserts .................................................................................70
8.7. Plug contacts charging cable set ............................................................................71
8.8. Check overvoltage protection .................................................................................72
9. Repair and service ........................................................................................................ 73
10. Disposal ................................................................................................................. 74
11. Technical data ........................................................................................................ 75