Alstom MiCOM P546 - Page 54

P54x/EN TD/La4 Technical Data
(TD) 2-24 MiCOM P543, P544, P545 & P546
TD
CB2F SC all: Enabled/Disabled
CB2F SC Shot 1: Enabled/Disabled
CB2F SC CS1: Enabled/Disabled
CB2F SC CS2: Enabled/Disabled
CB2F SC DLLB: Enabled/Disabled
CB2F SC LLDB: Enabled/Disabled
CB2F SC DLDB: Enabled/Disabled
Opto input labels
Opto Input 1:
(up to):
Opto Input 32:
User defined text string to describe the
function of the particular opto input.
Output labels
Relay 1:
(up to):
Relay 32:
User defined text string to describe the
function of the particular relay output contact.
Measurements list
Measurements 1
I Magnitude
I Phase Angle
Per phase (
 = A, B, C) current
measurements
IN derived Mag
IN derived Angle
ISEF Mag
ISEF Angle
I1 Magnitude
I2 Magnitude
I0 Magnitude
I RMS
Per phase (
 = A, B, C) RMS current
measurements
IN RMS
V- Magnitude
V- Phase Angle
V Magnitude
V Phase Angle
All phase-phase and phase-neutral voltages
(
 = A, B, C).
V1 Magnitude
V2 Magnitude
V0 Magnitude
V RMS
V- RMS
All phase-phase and phase-neutral voltages
(
 = A, B, C).
Frequency
(CB1) CS Volt Mag
(CB1) CS Volt Ang
(CB1) Bus-Line Ang
(CB1) CS Slip Freq
IM Magnitude
IM Phase Angle
I1 Magnitude
I1 Phase Angle
I2 Magnitude
I2 Phase Angle
I0 Magnitude
I0 Phase Angle
V1 Magnitude
V1 Phase Angle
V2 Magnitude
V2 Phase Angle
V0 Magnitude
V0 Phase Angle
CB2 CS Volt Mag (P544 and P546 only)
CB2 CS Volt Ang (P544 and P546 only)
CB2 Bus-Line Ang (P544 and P546 only)
CB2 CS Slip Freq (P544 and P546 only)
V1 Rem Magnitude
V1 Rem Phase Ang
Measurements 2
 Phase Watts
 Phase VArs
 Phase VA
All phase segregated power measurements,
real, reactive and apparent (
 = A, B, C).
3 Phase Watts
3 Phase VArs
3 Phase VA
Zero Seq Power
3Ph Power Factor
Ph Power Factor
Independent power factor measurements for
all three phases (
 = A, B, C).
3Ph WHours Fwd
3Ph WHours Rev
3Ph VArHours Fwd
3Ph VArHours Rev
3Ph W Fix Demand
3Ph VArs Fix Dem
I Fixed Demand
Maximum demand currents measured on a
per phase basis (
 = A, B, C).
3Ph W Roll Dem
3Ph VArs Roll Dem
I Roll Demand
Maximum demand currents measured on a
per phase basis (
 = A, B, C).
3Ph W Peak Dem
3Ph VAr Peak Dem
I Peak Demand
Maximum demand currents measured on a
per phase basis (
 = A, B, C).
Thermal State
Measurements 3
IA Local
IA Angle Local
IB Local
IB Angle Local
IC Local
IC Angle Local
IA remote 1