P54x/EN GS/La4 Getting Started
(GS) 3-18
MiCOM P543, P544, P545 & P546
GS
6. Select the device type.
7. Select the communications port.
8. Once connected, select the language for the settings file, the device name, then click
Finish. The configuration is updated.
9. In the Studio Explorer window, select Device > Supervise Device… to control the relay
directly.
1.10.3 Off-line use of MiCOM S1 Studio
Micom S1 St
udio can also be used as an off-line tool to prepare settings, without access to
the relay.
1. If creating a new system, in the Studio Explorer, select create new system. Then
right-click the new system and select New substation.
2. Right-click the new substation and select New voltage level.
3. Then right-click the new voltage level and select New bay.
4. Then right-click the new bay and select New device.
You can add a device at any level, whether it is a system, substation, voltage or bay.
5. Select a device type from the list, then enter the relay type, such as P54x. Click Next.
6. Enter the full model number and click Next.
7. Select the Language and Model, then click Next.
8. Enter a unique device name, then click Finish.
9. Right-click the Settings folder and select New File. A default file 000 is added.
10. Right-click file 000 and select click Open. You can then edit the settings. See the MiCOM
S1 Studio program online help for more information.
To Next Page
Loading...
