Alstom MiCOM P546 - Page 542

P54x/EN PL/La4 Programmable Logic
(PL) 7-8 MiCOM P543, P544, P545 & P546
Opto Signal
Cre
ate an opto signal.
Input Signal
Create an input signal.
Output Signal
Create an output signal.
GOOSE In
Create an input signal to logic to receive a GOOSE message
transmitted from another IED.
Used in either UCA2.0 or IEC 61850 GOOSE applications only.
GOOSE Out
Create an output signal from logic to transmit a GOOSE message
to another IED.
Used in either UCA2.0 or IEC 61850 GOOSE applications only.
Control In
Create an input signal to logic that can be operated from an external
command.
InterMiCOM In
Create an input signal to logic to receive an InterMiCOM command
transmitted from another IED.
PL
InterMiCOM
Out
Create an output signal from logic to transmit an InterMiCOM command
to another IED.
Function Ke
y
Create a function key input signal.
Trigger Signal
Create a fault rec
ord trigger.
LED Signal
Cre
ate an LED input signal that repeats the status of tri-color LED.
Contact Signal
Cre
ate a contact signal.
LED Conditioner
Cre
ate an LED conditioner.
Contact Conditioner
Cre
ate a contact conditioner.
Timer
Create a timer.
AN
D Gate