Getting Started P54x/EN GS/La4
MiCOM P543, P544, P545 & P546
(GS) 3-1
GS
CONTENTS
(GS) 3-
1. GETTING STARTED 3
1.1 User interfaces and menu structure 3
1.2 Introduction to the relay 3
1.2.1 Front panel 3
1.2.2 LED indications 4
1.2.3 Relay rear panel 5
1.3 Relay connection and power-up 6
1.4 Introduction to the user interfaces and settings options 7
1.5 Menu structure 7
1.5.1 Protection settings 8
1.5.2 Disturbance recorder settings 8
1.5.3 Control and support settings 8
1.6 Password protection 9
1.7 Relay configuration 9
1.8 Front panel user interface (keypad and LCD) 10
1.8.1 Default display and menu time-out 10
1.8.2 Navigating menu and browsing the settings 11
1.8.3 Navigating the hotkey menu 11
1.8.3.1 Setting group selection 11
1.8.3.2 Control inputs - user assignable functions 12
1.8.3.3 CB control 12
1.8.4 Password entry 13
1.8.5 Reading and clearing of alarm messages and fault records 13
1.8.6 Setting changes 14
1.9 Front communication port user interface 14
1.9.1 Front courier port 16
1.10 MiCOM S1 Studio relay communications basics 17
1.10.1 PC requirements 17
1.10.2 Connecting to the P841 relay using MiCOM S1 Studio 17
1.10.3 Off-line use of MiCOM S1 Studio 18
To Next Page
Loading...
