Alstom MiCOM P546 - Page 838

P54x/EN CM/La4 Commissioning
(CM) 10-90 MiCOM P543, P544, P545 & P546
CM
0A00 CT AND VT RATIOS P544/P546 Model
0A11 CT1 Polarity Standard*
Inverted*
0A12 CT2 Polarity Standard* Inverted*
0A13 SEF CT Polarity Standard* Inverted*
0A14 M CT Polarity Standard* Inverted*
0A21 CB1 CS VT PhShft Degrees
0A22 CB1 CS VT Mag.
0A23 CB2 CS VT PhShft Degrees
0A24 CB2 CS VT Mag.
0B00 RECORD CONTROL
0B04 Alarm Event Disabled*
Enabled*
0B05 Relay O/P Event Disabled* Enabled*
0B06 Opto Input Event Disabled* Enabled*
0B07 General Event Disabled* Enabled*
0B08 Fault rec. Event Disabled* Enabled*
0B09 Maint. rec. Event Disabled* Enabled*
0B0A Protection Event Disabled* Enabled*
0B2F Flt Rec Extended Disabled* Enabled*
0C00 DISTURB. RECORDER
0C01 Duration
0C02 Trigger Position Single* Extended*
0C04 Analog Channel 1
0C05 Analog Channel 2
0C06 Analog Channel 3
0C07 Analog Channel 4
0C08 Analog Channel 5
0C09 Analog Channel 6
0C0A Analog Channel 7
0C0B Analog Channel 8
0C0C Digital Input 1
0C0D Input 1 Trigger
No Trigger*
Trigger L – H*
Trigger H – L*
0C0E Digital Input 2
0C0F Input 2 Trigger
No Trigger*
Trigger L – H*
Trigger H – L*
0C10 Digital Input 3
0C11 Input 3 Trigger
No Trigger*
Trigger L – H*
Trigger H – L*