Altech VAST DSR4639 - 8 DSD4121 DECODER FEATURES AND MENU; 8.1 I-PLATE; 8.2 CHANGING CHANNELS

To Next Page

To Previous Page

16 | P a g e

8 DSD4121 DECODER FEATURES AND MENU

8.1 I-PLATE

The information plate (I-Plate) displays information about the current and next event at the

bottom of the screen.

The i-Plate can be launched by pressing the ”i” button on the remote.

8.2 CHANGING CHANNELS

8.2.1 To change to a different channel either:

8.2.2 Press the “CH+” or “CH-” buttons on the remote to change the channel to the

next/previous channel respectively, or

8.2.3 When the i-Plate is open, press the “LEFT/RIGHT” arrow buttons on the remote.

This allows you to browse the program information of the other channels without

changing the channel you are presently viewing. Press OK to switch to that

channel

NOTE: The i-Plate will only timeout when changing channels from the “CH+” or “CH-” button. If

you have manually opened the i-Plate, the “EXIT” button must be pressed to remove it.