23 | P a g e
© Copyright 2012 Altech UEC (Pty) Ltd
12.4 DISH INSTALLATION MENU
This is where the set top box is configured according to your satellite options. In most cases,
no changes are required to this menu. However, if an old LNB is used then most likely the
LNB frequency value should be set to 11300. (11300 is the most common alternate
frequency, but this frequency value is dependent on the LNB used)
12.5 TO CONFIGURE THE LNB
12.5.1 Launch the menu
12.5.2 Press the right button to move to the sub menu
12.5.3 Press the down button to move to the LNB Frequency option
12.5.4 Press OK to edit the number
12.5.5 Type in the new LNB frequency
12.5.6 Press OK to save the change setting.
12.5.7 To return to the main menu press left arrow or EXIT of the remote.
To Next Page
Loading...
General