OPERATION
Sel f -Cl e aning Ro ti s ser i e O v e n ▪ Ser v i ce M anual ▪ MN- 392 4 3 ▪ Rev 1 ▪ 2/19
21
How to Operate the Holding Cabinet
Before you begin The holding cabinet must be connected to electric power and turned on.
Procedure
To operate the holding cabinet, do the following.
Step Action
1. Set the temperature using the arrow buttons a.
Press and hold the arrow button to change degree intervals by ten (10)
degrees.
Displaying the
temperature
2. Press and hold the temperature recall button b to display the actual
temperature.
Result The holding cabinet is now ready for holding food.
NOTE: The temperature set-point range is 60°F – 200°F
(16°C – 93°C)
To Next Page
Loading...
