MAINTENANCE
Vector™ H Serie s ▪ S ervice M an ual ▪ MN-4 6 543 ▪ R ev 01 ▪ 11/ 1 9
58
How to Clean the Oven
Before you begin
Daily cleaning
procedure
To clean the oven daily, do the following.
Step Action
1. Make sure the oven is turned off and cool—chambers are less than 140°F
(60°C).
2. Remove any spills with disposable paper wipes or a damp cloth.
3. Wipe the outside of the oven with a damp cloth.
4. Wipe the outside of the oven with a stainless steel cleaner.
Continued on next page
WARNING: Electric shock hazard.
Set the main disconnect switch to the OFF position to remove
electric power from the appliance.
CAUTION: Burn hazard.
Allow the oven, utensils, and racks to cool before cleaning.
CAUTION: Corrosive materials hazard.
Wear eye protection and hand protection when cleaning.
NOTICE
Using improper cleaning procedures will damage the catalyst
and void the warranty.
Only use spray cleaner when the electric power is completely
removed from the oven.
Do not spray water or cleaning solution on the catalyst.
Do not spray cleaner into the oven while the recirculation
blower is running.
Do not use steel pads, wire brushes, or scrapers when
cleaning.
To Next Page
Loading...
Need help?
General
