ASSEMBLY/DISASSEMBLY
Ve ct or™ H Se ries ▪ S ervice Ma nual ▪ MN -4 6 54 3 ▪ R ev 01 ▪ 11/ 19
99
Removing and Installing a Heater Element
Before you begin ▪ The oven must be disconnected from electric power.
▪ Have a replacement heater element.
Procedure To remove and install a heater element, do the following.
Step Action
1. Open the top and remove the left side service panel.
2. Disconnect the heater element wires.
Continued on next page
WARNING: Electric shock hazard.
Disconnect the appliance from electric power before servicing
the appliance.
To Next Page
Loading...
