Feature Description
Select Allows the user to select the number to be entered into the
dial configuration page
Location Optional entry to allow the user to specify a city or place
associated with the phone number
Access Number Phone number for the ISP
Access Numbers
You may find ISP Numbers in your area using either the state or area code where you are
located. Both state and area code are not required.
Feature Description
Area Code Area code of the dial up number you are looking for
State State of the dialup number you are looking for.
Broadband Configuration Features
Broadband is the catch all term used to refer to cable, DSL and local Ethernet networks
connected to the internet.
Broadband Configuration page
On this page you can configure the IP address settings used by the WAN port of the
WiFlyer. For DHCP mode, you do not need to fill in the address settings. For static mode,
the IP address settings must be entered below. Most ISPs use DHCP mode, check your
ISP documentation to be sure.
Mode
Feature Description
WAN Mode Select the mode your ISP uses to assign IP addresses.
Static – Least common ISP connection type
DHCP – used by most cable modems and local networks
PPPoE – used by most DSL providers
14
To Next Page
Loading...
Need help?
General