Configuring the WiFlyer Using a Dial-up Connection
Use the following instructions if you connect to the internet using a dial-up connection.
1. Close your email client (Outlook®, Outlook Express®, Eudora®, etc)
2. Open a web browser.
Your web browser should automatically connect to the WiFlyer dialup configuration
page. If your browser does not connect to the dial page enter http://192.168.0.77 in the
address bar of your browser.
3. Enter your ISPs access number, user name and password.
4. Select the country you are dialing from, and the connection type. Standard
connection is used for all ISPs except AOL and MSN. If your ISP is AOL or MSN
chose the AOL or MSN type.
5. Click Dial Now!
Your browser will switch to the Connection Status screen. The icons on the connection
status screen will change color as your modem connection progresses. You are now
connected to your ISP. Enjoy your dialup WiFlyer.
Configuring the WiFlyer Using a Broadband Connection
Use the following instructions if you connect to the internet using a broadband connection.
1. Open your web browser
Your web browser should automatically connect to the WiFlyer dialup configuration
page. If your browser does not connect to the dial page, enter http://192.168.0.77 in
the address bar of your browser.
2. Click the Switch to Broadband button to change the WiFlyer into broadband
mode.
3. In the broadband administration screen choose Static, DHCP, or PPPoE mode for
your broadband connection. Most Ethernet connections are DHCP.
a. If your provider requires a static IP address, enter the IP address settings
in the Address Settings area.
b. If your connection is PPPoE enter in your username and password in the
PPPoE settings area.
4. Click save and you are connected to the internet.
10
To Next Page
Loading...