Always On WiFlyer User Manual

Port Trigger Configuration
Some applications require multiple connections, such as Internet gaming, video
conferencing, Internet telephony and others. These applications have difficulties working
through NAT (Network Address Translation). Special Applications makes some of these
applications work with the WiFlyer. If you need to run applications that require multiple
connections, specify the port normally associated with an application in the “Trigger
Port” field, select the protocol type as TCP or UDP, then enter the public ports associated
with the trigger port to open them for inbound traffic.
Feature Description
Enabled Name Name of the network service being forwarded,
optional field
Protocol TCP or UDP for incoming port
Ports From This is the first port used to trigger the
application. It can be either a single port or a
range of ports.
Trigger Ports
Ports To This is the ending port used to trigger the
application.
Protocol TCP or UDP for incoming port
Ports From This is the first outgoing port for the
application.
Port Range to
Open
Ports To This is the last outgoing port in the range for
the application.
20

Always On WiFlyer Specifications

General

Brand	Always On
Model	WiFlyer
Category	Network Router
Language	English