Ambient Weather WS-5000 User Manual

Version 1.10 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 38
6.7.16 Wi-Fi Scan
x 16
Press to perform a Wi-Fi Scan. Your wireless router will appear.
Press to select your wireless network. Press to enter the password. Press to
scroll to the character and press to select the character. Press OK when complete. Press to return to the
Wi-Fi Network setup page. Leave the password blank of the Wi-Fi network is not encrypted.
Note: The Wi-Fi signal strength icon is displayed on the home page. If wireless connectivity is successful and
you are reporting to Wunderground.com, the Wi-Fi icon on the top left-hand side of the display tablet.
If you do not see your wireless network, press the Return button and perform another Wi-Fi scan. If the
problem persists, power down and up your display tablet and perform another Wi-Fil scan.
If you are uploading to Wunderground.com successfully, the icon will show on the left top of the display
tablet. If you are uploading to AmbientWeather.net successfully, the icon will show on the left top of the
display tablet.
Figure 37
Select value
Select value
Scroll field up
Scroll field down
Select
return to Setup

Ambient Weather WS-5000 Specifications

General

Wireless Frequency	915 MHz
Wind Speed Accuracy	± 1 mph
UV Index Range	0 to 16
Light Range	0 to 200, 000 Lux
Solar Radiation Range	0 to 1800 W/m²
Connectivity	Wi-Fi
Display Type	TFT LCD
Transmission Distance	1000 feet
Temperature Range	-40 to 140 °F
Humidity Range	10% to 99%
Wind Direction	0° to 360°
Rainfall Measurement	0 to 999.9 inches
Power Source (Outdoor Sensor)	Solar panel with battery backup
Console Power Source	5V DC adapter
Data Storage	Ambient Weather Network
Compatibility	Amazon Alexa, Google Assistant, IFTTT