Ambient Weather WS-5000 User Manual

Version 1.10 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 46
Figure 55
6.8 Alarm Mode
Press to Enter the Alarm Mode
The upper alarm is displayed on the right and the lower alarm is displayed on the left. If the measured value is greater
than the maximum alarm setting, the alarm will sound. If the measured value is less than the minimum alarm setting,
the alarm will sound.
To adjust the alarm, press to scroll to the alarm setting you wish to change. Press to highlight the sign
(positive vs. negative) and significant digit. Press to change the value.
To set the alarm,, press to highlight the alarm symbol and press to toggle the alarm ON or OFF.
When a weather alarm condition has been triggered, the alarm will sound for 120 seconds and the corresponding icon
will flash red for the high alert limit, and blue for the low alert limit, until the weather condition is no longer
present. Press any key to mute the alarm.
You can also set a time of day alarm using the same method.

Ambient Weather WS-5000 Specifications

General

Wireless Frequency	915 MHz
Wind Speed Accuracy	± 1 mph
UV Index Range	0 to 16
Light Range	0 to 200, 000 Lux
Solar Radiation Range	0 to 1800 W/m²
Connectivity	Wi-Fi
Display Type	TFT LCD
Transmission Distance	1000 feet
Temperature Range	-40 to 140 °F
Humidity Range	10% to 99%
Wind Direction	0° to 360°
Rainfall Measurement	0 to 999.9 inches
Power Source (Outdoor Sensor)	Solar panel with battery backup
Console Power Source	5V DC adapter
Data Storage	Ambient Weather Network
Compatibility	Amazon Alexa, Google Assistant, IFTTT