U10C034 MSO User’s Manual v1.4 June 2008
47
emtaSignalingDevToneWholeToneRepeatCount
(1.3.6.1.4.1.4413.2.2.2.1.6.4.24.1.2.x Unsigned32)
This is the repeat count which signifies how many times to repeat the
entire on-off cadence sequence. This object should only be changed by
the configuration file.
emtaSignalingDevToneSteady(1.3.6.1.4.1.4413.2.2.2.1.6.4.24.1.3.x
Integer32)
This is the steady tone. Device must play out the on-off cadence sequence
for pktcSigDevToneWholeRepeatCount times and then apply the last tone
forever. This object should only be changed by the configuration file.
emtaSignalingDevToneFirstFreqValue(1.3.6.1.4.1.4413.2.2.2.1.6.4.25.1
.2.x Unsigned32)
This object represents the value of the first frequency of a tone type.
This object should only be changed by the configuration file.
emtaSignalingDevToneSecondFreqValue
(1.3.6.1.4.1.4413.2.2.2.1.6.4.25.1.3.x Unsigned32)
This object represents the value of the second frequency of a tone type.
This object should only be changed by the configuration file.
emtaSignalingDevToneDbLevel
(1.3.6.1.4.1.4413.2.2.2.1.6.4.25.1.4.x Integer32)
This object contains the decibel level for each analog signal (tone) that
is locally generated (versus in band supervisory tones) and sourced to
the a-b terminals (TE connection point). Each tone in itself may consist
of multiple frequencies as defined by the MIB table
‘emtaSignalingDevMultiFreqToneTable’. This object should only be changed
by the configuration file.
emtaSignalingDevToneFreqOnDuration
(1.3.6.1.4.1.4413.2.2.2.1.6.4.25.1.5.x Unsigned32)
This object contains the duration for which the frequency reference
corresponding to the tone type is turned on. This object should only be
changed by the configuration file.
emtaSignalingDevToneFreqOffDuration
(1.3.6.1.4.1.4413.2.2.2.1.6.4.25.1.6.x Unsigned32)
This object contains the duration for which the frequency reference
corresponding to the tone type is turned off. This object should only
be changed by the configuration file.
emtaSignalingDevToneFreqRepeatCount
(1.3.6.1.4.1.4413.2.2.2.1.6.4.25.1.7.x Unsigned32)
This object indicates the number of times to repeat the cadence cycle
represented by the on/off durations (represented by
To Next Page
Loading...
