To Next PageTo Next PageWhat to do if Ambul Medical Equipment T5 cannot be shut down?
If the Ambul Medical Equipment T5 cannot be shut down, it might be due to improper operation. Try long-pressing the Start/Shut Down button for 3 seconds or more.
Why does Ambul T5 Medical Equipment have significant oxygen loss?
Significant oxygen loss in Ambul Medical Equipment may be due to leaks in the air supply hose. You should locate and eliminate the leakage.
What to do if Ambul T5 battery service duration is short?
A short battery service duration in Ambul Medical Equipment may mean the battery service life has expired. Replace the battery with a new one.
What to do if Ambul Medical Equipment power supply LED operates unstably?
If the power supply LED operates unstably in Ambul Medical Equipment, the power supply plug might be loose. Try re-connecting the power supply.
What to do if Ambul Medical Equipment T5 fails to start?
If your Ambul Medical Equipment T5 fails to start, it could be due to two reasons: either the T5 malfunctions, in which case you should contact the manufacturer or your dealer for repair, or the battery is exhausted, in which case you should recharge it.
What causes high ventilation rate per min. in Ambul Medical Equipment?
A high ventilation rate per minute in Ambul Medical Equipment may be caused by exceeding the set upper limit of ventilation rate per minute. Examine the patient's condition and check whether the upper limit is set properly.
What causes low ventilation rate per min. in Ambul T5?
A low ventilation rate per minute in Ambul Medical Equipment can occur if it is lower than the set lower limit of ventilation rate per minute. Examine the patient's condition and check whether the lower limit is set properly.
What causes high airway pressure in Ambul T5 Medical Equipment?
High airway pressure in Ambul Medical Equipment may be because it exceeds the set upper limit. Examine the patient's condition.
What causes asphyxia when using Ambul Medical Equipment?
Asphyxia when using Ambul Medical Equipment can be caused if the asphyxia duration exceeds the set value. Examine the patient's condition and check whether the duration value is set properly.
General| Brand | Ambul |
|---|---|
| Model | T5 |
| Category | Medical Equipment |
| Language | English |
