Ambul T5 - Ventilation;Operation; Patient Respiratory Hose Assembly; Software

H-1.601. 00137-B3.0
Page 4 of 81
1.4 Ventilation/Operation
• During ventilation, uninterrupted observation of both the patient and
respiratory equipment must be performed.
• Prolonged breathing through respirator may result in atrophy of patient's
respiratory muscles.
• Lengthy ventilation may cause patient's respiratory tract dry. Make sure
sufficient natural air is available for adjustment of respiration.
• Make high-pressure ventilation in a short time under instruction of an
physician. Because uninterrupted high-pressure ventilation for a long
time may injure a patient. Guarantee unimpeded respiratory hose of
patient to prevent influencing ventilation function of equipment.
1.5 Patient Respiratory Hose Assembly
Warning：
• Those using patient's respiratory hose assembly must have taken
professional medical training and technical instruction on respiratory
equipment for improper use may lead to serious physical injury.
• Please refer to related contents in the manual and make functional test
and visual inspection before using respiratory hose assembly.
• Before connecting to patient, please check whether direction of oxygen
flow transported to patient is correct and whether the respiratory hose is
unimpeded.
• Patient respiratory hose assembly can be used only for the intended
purpose.
• Patient respiratory hose assembly is unsuitable for high pressure
applications (hyperbaric chamber).
1.6 Software
Many quality assurance measures have been taken in development of
equipment software to minimize the risks potentially caused by software
defect.