EasyManua.ls Logo

Ambul T5 - Setting of Alarm Limits

Ambul T5
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
H-1.601. 00137-B3.0
Page 26 of 81
Adapter disconnencted!!
CPR
VentilateCPREventsAlarm
tidal volume
I/E
Freq
PEEP
Fio2
Events
FIGURE 14 Events
Up to 50 items of log message can be stored in the system. The older Events
will be overwritten by the newer ones. In reviewing logs, pay attention to the
following:
Events message structure: time + type + content of message.
Events time: the time of recording the Events.
Events type: alarm message, user access message, and system operation
message. (for the time being only alarm message is available)
Events message: specific message description.
Events color: red - high priority; yellow - medium priority; black - low
priority.
3.5
Setting of Alarm Limits
In the main menu interface, select < Alarm Limits > soft button to enter the
Alarm Limits interface, You can set alarm limits based on patient's respiratory
physiological characteristics(As shown below).

Table of Contents