Amcrest AMDV4M4 User Manual

63
To confirm settings, click the Save button. To revert to default settings, click the Default button.
To revert to default settings, click the Default button near the bottom left hand corner. To copy settings to another
channel, click the Copy button near the bottom right hand corner. To confirm settings, click the Save button near
the bottom right hand corner. To cancel any modifications, click the Cancel button near the bottom right hand
corner. To apply the settings, click the Apply button near the bottom right hand corner. After completing the setup
please click the save button to go back to the previous menu.
4.10.1.6 Channel Name
This screen is used to modify the channel names. Each field supports a maximum of 31 characters.
To revert to default settings, click the Default button near the bottom left hand corner. To confirm settings, click
the Save button near the bottom right hand corner. To cancel any modifications, click the Cancel button near the
bottom right hand corner. To apply the settings, click the Apply button near the bottom right hand corner. After
completing the setup please click the save button to go back to the previous menu.
4.10.1.7 Channel Type
This screen is used to set the channel type. The supported channel types are coaxial, UTP, and IP.
To revert to default settings, click the Default button near the bottom left hand corner. To confirm settings, click
the Save button near the bottom right hand corner. To cancel any modifications, click the Cancel button near the

Amcrest AMDV4M4 Specifications

General

Brand	Amcrest
Model	AMDV4M4
Category	DVR
Language	English