78
Below is an explanation of the fields on the Alarm Center settings screen:
• Enable: This checkbox allows the user to enable the Alarm Center feature for the DVR.
• Protocol Type: This field allows the user to select which protocol type they want to use for the alarm.
Currently, only the private protocol type is available.
• Server IP: This field allows the user to enter the IP address of the alarm server.
• Port: This field allows the user to enter the port number of the alarm server.
• Self-Report Time: This field allows the user to enter a time of the day when they want to receive a report
about the DVR’s connection to the network each day.
To revert to default settings, click the Default button near the bottom left hand corner. To confirm settings, click
the Save button near the bottom right hand corner. To cancel any modifications, click the Cancel button near the
bottom right hand corner. To apply the settings, click the Apply button near the bottom right hand corner.
4.10.2.14 P2P
The P2P settings screen is where users can use a QR code to connect their smartphone or tablet to the DVR. The
HDCVI uses an app called Amcrest View, and it is available on both iOS and Android. Below is a screenshot of the
P2P settings screen:
To Next Page
Loading...
Need help?
General
