Advanced Features
22 Intellex® Ultra
Searching by Camera
Click Cameras to search for segments by camera.
Searching by Alarms
Click Alarms to search for segments based on alarm information.
Searching Using Filters
1 From the Search Mode page, click With Image
Filters
.
2 Click the Filters tab.
3 Select a camera.
4 Set the length of time that search should skip
ahead after a qualified video segment is found.
5 Select the type of filter to search for in the
database.
6 Click Setup to configure the filter.
Include segments from all
cameras or a specific
camera in the search.
Includes segments
regardless of alarm input.
Includes any segments
with an alarm input.
Includes segments with a
specific alarm input.
Includes all
video loss segments.
Includes all segments with
generated alarms.
Includes any segments that
were recorded because a
specific filter was triggered.
Includes segments that
were recorded because a
filter was triggered.
Includes segments
regardless of filter criteria.
To Next Page
Loading...
Need help?
General
