Advanced Features
36 Intellex® Ultra
Monitoring Hard Drive Health
Intellex now offers a feature to monitor and anticipate whether a hard drive's health is failing, and if
so, notify the user. The drive attributes that Intellex monitors are manufacturer-specific, so these
vary for each user’s system. Problems include reliability, temperature, and volume errors. If one of
these screens appears, click Storage Setup.
Solutions include:
• Replacing the affected hard drive as soon as possible.
• To correct a temperature problem, make sure that the ambient air temperature around the
Intellex case is less than 35
o
C (95
o
F), the internal cooling fans are operating properly, and
there is adequate air flow around the case.
Note
The system also alerts the user via E-mail notification when it has detected an unhealthy drive.
Refer to Setting Up E-mail Notification in the chapter on Configuring the Intellex in the Installation
and Configuration Guide.
Login name of the user
and time the action was
performed
Whether action was local to
Intellex or done through Network
Client or other remote software
The action’s
category
Describes the
activity
Exports the
entire log to a
file
Exports the
displayed log to
a file
Prints all the entries;
may print remotely
through third party
software (shows IP
address)
Action within
the category
Prints only the
entries visible
on the screen
To Next Page
Loading...
Need help?
General
