Advanced Features
26 Intellex® Ultra
OR
8 To define an AD IP Encoder text stream:
a From the Connection Type drop-down box, select AD IP Encoder.
b Click Setup next to the Connection Type box. The Setup AD IP Encoder Text Stream
Options screen appears.
c Highlight the IP address for the device which will be used for the text stream, then select the
text channel from the drop down menu. The text channel is the serial port on the IP Encoder
that is receiving the incoming text stream.
d Select OK, the Text Source screen will be displayed.
9 Highlight a text formatter from the handler Type drop down menu.
10 Click Setup next to the handler type to access a printer interface.
11 For the General Text handler, enter an end-of-line delimiter to display text lines from a receipt.
• Click Default to reset the box definition to default 0D 0A. Click OK.
• For the American Dynamics handler, select one or both options to record and display entries.
Click OK.
Entries from printed retail journal receipts.
Entries from printed customers’ receipts.
To Next Page
Loading...
