Ametek Sorensen DCS-E Series User Manual

M362500-01 Rev K www.programmablepower.com
DCS-E 1kW Series & DCS-E
1.2kW Series DC Power
Supplies
Operation Manual
This manual covers models:
DCS8-125E DCS33-33E DCS60-18E DCS150-7E
DCS8-140E DCS33-36E DCS60-20E DCS150-8E
DCS10-100E DCS40-25E DCS80-13E DCS300-3.5E
DCS10-120E DCS40-30E DCS80-15E DCS300-4E
DCS20-50E DCS50-20E DCS100-10E DCS600-1.7E
DCS20-60E DCS50-24E DCS100-12E DCS600-2E

Ametek Sorensen DCS-E Series Specifications

General

Brand	Ametek
Model	Sorensen DCS-E Series
Category	Power Supply
Language	English

Summary

Important Safety Instructions

SECTION 1 FEATURES AND SPECIFICATIONS

Specifications Overview

Details electrical, physical, and mechanical specifications for 1kW and 1.2kW models.

SECTION 2 INSTALLATION AND OPERATION

Installation and Setup

Covers unpacking, inspection, input voltage selection, ventilation, and rack mounting.

Controls, Connectors, and Indicators

Initial Functional Tests

Procedures for verifying basic unit operation and settings before use.

Standard Operation Procedures

Guidelines for load connection, grounding, inductive loads, and remote sensing.

Multiple Supply Configurations

Over Voltage Protection (OVP)

Remote Programming and Control

Explains remote control of voltage, current, OVP, and monitoring via J3.

SECTION 4 MAINTENANCE, TROUBLESHOOTING, AND CALIBRATION

Troubleshooting Guide

Provides steps for diagnosing and resolving operational issues and symptoms.

Calibration Procedures