Ametek Sorensen DCS-E Series User Manual

Sorensen DCS Series 1kW and 1.2kW Supplies Installation and Operation
M362500-01 Rev K 2-3
2.3.5 Rack Mounting
The DCS power supply is designed to fit in a standard 19" equipment rack. When installing the
unit in a rack, be sure to provide adequate support for the rear of the unit while not obstructing
the ventilation inlet on the sides of the unit. Use adjustable support angles such as Hammond
RASA22WH2, or a support bar such as Hammond RASB19WH2.

Ametek Sorensen DCS-E Series Specifications

General

Brand	Ametek
Model	Sorensen DCS-E Series
Category	Power Supply
Language	English