Sorensen DCS Series 1kW and 1.2kW Supplies Contents
M362500-01 Rev K
ix
Important Safety Instructions
Before applying power to the system, verify that your product is configured properly for your particular
application.
Hazardous voltages may be present when covers are removed. Qualified
personnel must use extreme caution when servicing this equipment.
Circuit boards, test points, and output voltages also may be floating above
(below) chassis ground.
1.1
The equipment used contains ESD sensitive parts. When installing
equipment, follow ESD Safety Procedures. Electrostatic discharges might
cause damage to the equipment.
Only qualified personnel who deal with attendant hazards in power supplies, are allowed to perform
installation and servicing.
To Next Page
Loading...
Need help?
General
