INTRODUCTION
6 OTOWAVE 302+ INSTRUCTION FOR USE
1.4. STANDARD AND OPTIONAL ACCESSORIES
Shipping documentation will reference the stock number quoted above, and images of the parts alongside the relevant
stock number are available on the Amplivox website (www.amplivox.com). The required fitting instructions are supplied
with each part.
Otowave 302+ Tympanometer base unit
Contralateral reflex transducer (probe tip
& earpiece lead)
Power Supply - FW7660M/05
Set of disposable ear-tips
USB with Software (ampliSuite and Noah
impedance module) and Operating
Manuals
4 in 1 cavity assembly
(0.2 ml/0.5 ml/2.0 ml/5.0 ml)
Cable USB a to USB B (1.8 m)
Sanibel MPT-II Thermal Printer
(standard in US conf.)
Thermal Printer paper for Sanibel
MPT-II (standard in US conf.)
Printer cable – Otowave to Sanibel MPT-
II (standard in US conf.)
Earpiece lead for contralateral reflex
transducer
Probe tip for contralateral reflex
transducer
Additional sets of ear tips
Ear tip Otowave 3-5mm, 25 pieces
Ear tip Otowave 4-7mm, 25 pieces
Ear tip Otowave 7mm, 25 pieces
Ear tip Otowave 8mm, 25 pieces
Ear tip Otowave 9mm, 25 pieces
Ear tip Otowave 10mm, 25 pieces
Ear tip Otowave 11mm, 25 pieces
Ear tip Otowave 12mm, 25 pieces
Ear tip Otowave 13mm, 25 pieces
Ear tip Otowave 14mm, 25 pieces
Ear tip Otowave 15mm, 25 pieces
Ear tip Otowave 19mm, 25 pieces
Applied part as according to IEC 60601-1