40 AXCESS Programming AXB-F117 Stealth 1 Camera Controller
Preset commands (Cont.)
Command Description
SEND_COMMAND CAM,'RP10S64'
Recalls preset 10. If any are in positional mode, the
current voltages for zoom, focus, and/or iris will be
ramped to the preset voltages at the current speed.
If any are in speed mode, the motor drive outputs
for zoom and/or focus will move at half speed (64).
Pan/tilt outputs will move at half speed. Turns on
channel 110.
SEND_COMMAND CAM,'RP10T100S64'
Recalls preset 10. If any are in positional mode,
voltage outputs for zoom, focus, and/or iris will ramp
to position in 10 seconds. If any are in speed mode,
the motor drive outputs for zoom and/or focus will
move at half speed (64). Pan/tilt outputs will use
current speed. Turns on channel 110.
'SP<preset 1-255>’ Store preset.
Example:
SEND_COMMAND CAM,'SP1'
Stores current values to Preset 1.
To Next Page
Loading...
