User Manual - CTC-1402
52
No. Command Description Example
17 set dns Set DNS service >set dns
--- Enter new values or keep current settings at the prompts ---
-- Current DNS #1 --
Change the current value? Y/N -> y
Enter DNS #1 192.168.2.1
-- Current DNS #2 --
Change the current value? Y/N -> Y
Enter DNS #2 192.168.3.1
Would you like to save the new settings? Y/N -> Y
New settings were saved...
18 dns list Display the current dns. >dns list
Domain Name: amx.com
DNS List:
DNS #1: 192.168.2.1
DNS #2: 192.168.3.1
19 set
friendlyname
Set friendlyname >set friendlyname
Please input friendlyname:
Old friendlyname:
New friendlyname: 111
Would you like to save this setting(Y/N) y
Setting is ok , you should reboot that make it eective
20 set location It’s setting location. >set location
Please input location:
Old location:
New location: 333
Would you like to save this setting(Y/N) y
Setting is ok , you should reboot that make it eective
21 set connection Set the master connection
settings.
>set connection
--- Enter New Values or just hit Enter to keep current settings ---
Enter Mode
Type T for TCP/URL, U for UDP/URL, N for NDP
or A for Auto and then Enter: Icsp_Auto A
Enter Master System Number: 1 1
--- New settings ---
System Number 1
Master Port 1319
Is this correct? Type Y or N and Enter -> Y
Changed && Saved
22 get connection Get the master connection
settings.
>get connection
Connection Mode: Icsp_Auto
System Number: 1
Master Ip/URL
Master Port: 1319
23 set telnet
username
Set telnet service login
username
>set telnet username
Enter Telnet new username 123
Would you like to set this username (y/n) y
(please set telnet password)
Changed && Saved
Telnet/SSH Commands (cont.)
To Next Page
Loading...
Need help?
General