AMX SC-N8012 User Manual

Chapter 3: Configuration Options
32
N-Command User Manual
Auto-login Password In most cases, leave at default setting (password). Mostly for use with legacy products. If a unit does not
support self-hosted web pages, N-Command will try
to log in to display the web page using the given
username and password.
Enable LDAP Enable to configure the unit to access the network’s
LDAP (lightweight directory access protocol) services.
Server Domain Enter the IP address of the LDAP server.
AD Name Enter the Active Directory’s name.
LDAP Guests Enable to allow guest access to LDAP through
N-Command.
If enabled, this allows base-level users with guest
credentials to access certain systems through
N-Command.
Save button Click to save setting made to this section.
Unsolicited Unit Status
section
Devices in this list are not configured to send periodic
status packets to this N-Command unit. To enable a
device to begin sending unsolicited status packets,
select it in the list and then click the Assign to... button
on the right.
Enable Netlinx Settings
checkbox
Click to enable/disable NetLinx on this device.
Device Status This status field will show the device to be Online,
Connected, Offline, or Unknown.
Master Mode dropdown Select Auto, Listen, or URL.
IP/URL field Enter the address of the Master Controller.
Port This field should always be set to 1319.
Device Number Defaults to a dynamic device number. May be set to a
static range (e.g., 8000).
System Number Determines which system to connect. This setting is
dependent upon the Master Mode selected (see above).
If Master Mode is set to Auto, the System Number is
set and the system discovers the Master Controller’s
IP address.
If Master Mode is set to Listen, the device connects
to any Master Controller.
If Master Mode is set to URL, the IP of the Master
Controller is set.
Username Username for the Master Controller.
Password Password for the Master Controller.
Save button Click to save settings made on this page.
TABLE 16 System Settings Option Descriptions (Cont.)
Option Description Notes

AMX SC-N8012 Specifications

General

Brand	AMX
Model	SC-N8012
Category	Controller
Language	English