Chapter 3: Configuration Options
Batch LP 1-to-1 Page
Click Local Play > Batch LP 1-to-1 to access the page shown in Figure 34. Use this page to send a single image to the selected units
by following the steps below.
1. Highlight the desired image from the Available Images box.
2. Highlight the desired units and click the right arrow.
3. Select the Playlist to upload this image to.
4. Select the Mode.
5. Click Start Batch button to begin the process.
FIG. 34
Batch LP 1-to-1 Page
To Next Page
Loading...
