Analog Devices ADRV9001 User Manual

UG-1828 Preliminary Technical Data
Rev. PrC | Page 278 of 338
VDDA_1P8
5% tol.
VDD_1.0V
5% tol.
VDIG_1P0 (L7,L8)
VDD_1P8
5% tol.
VDDA_1P3
2.5% tol.
VDIGIO_1P8 (M7)
VDIG_0P9 (M8)
VCONV_1P8 (G7) VAGPIO_1P8 (G8) VANA1_1P8 (H13) + External Tx1 pull-ups
VANA2_1P8 (H2) + External Tx2 pull-ups
VRFSYN1_1P3 (E11)
VRFSYN2_1P3 (E4) VAUXSYN_1P3 (E10) VCLKSYN_1P3 (E5)
VRFVC01_1P3 (A10) VRFVC02_1P3 (A5) VCLKVCO_1P3 (G5)
VAUXVCO_1P3 (G10) VANA1_1P3 (C8) VANA2_1P3 (C7) VRFVCO1_1P0 (B9) VRFLO1_1P0 (A9) VRFVCO2_1P0 (B6) VRFLO2_1P0 (A6) VCONV_1P3 (H8) VRX1LO_1P3 (E13)
VRX2LO_1P3 (E2)
VTX1LO_1P3 (G12)
VTX2LO_1P3 (G3) VCLKVCO_1P0 (H5) VAUXVCO_1P0 (H10) VCONV_1P0 (H7) VRX1LO_1P0 (E14)
VRX2LO_1P0 (E1)
VTX1LO_1P0 (H12)
VTX2LO_1P0 (H3)
VANA2_1P0 (C6) VANA1_1P0 (C9)
4.7µF
4.7µF
Not connected
4.7µF
Not connected
Standard operating Mode 0
All internal LDOs used
Rx1/Rx2/Tx1/Tx2 used
Rx1/Tx1/Tx2 used
Rx2 not used
Rx2/Tx1/Tx2 used
Rx1 not used
Tx1/Tx2 used
Rx1/Rx2 not used
VRX1LO_1P3 (E13)
VRX1LO_1P0 (E14)
VRX2LO_1P3 (E2)
VRX2LO_1P0 (E1)
VRX1LO_1P3 (E13)
VRX2LO_1P3 (E2)
VRX1LO_1P0 (E14)
VRX2LO_1P0 (E1)
Figure 264. Power supply modes for different number of active Tx RF IOs

Analog Devices ADRV9001 Specifications

General

Brand	Analog Devices
Model	ADRV9001
Category	Transceiver
Language	English