12
－How to use the charging stand (sold separately)－
Pipettes can be charged by hooking onto one of the following devices
mentioned in “17-1 Stands and hanger”: charging stand for single
MPA, charging stand for four MPAs, charging hanger.
Consult the instruction manual for each device for more details.
7-3 Exchange Selectable power plug
The A-Type power supply plug is originally attached to the AC adapter ,Please
change the power supply plug to the one that suits your location.
Exchange method
1. As shown, remove the power supply plug from the AC adapter.
2. As shown, put on the power supply plug that you want to use.
or
or
1. Remove the power supply plug.
2. Put on an appropriate power supply plug.
BF-Type
C-Type S-Type
To Next Page
Loading...