AND MPA-10 - Multiple Dispensing Mode (MD)

19
3) Operating the standard mode
[ 1 ] Put the tip end into the liquid to be dispensed
and press the Operation key on the
pipette to aspirate the liquid.
[ 2 ] Put the tip end into the receiving vessel and
press the Operation key on the pipette to
dispense the liquid.
[ 3 ] Press the Operation key on the pipette to
dispense the liquid remaining in the tip.
(When the blowout function is ON ( ).)
9-2 Multiple dispensing mode (MD)
1) Operation of the multiple dispensing mode
This is a suitable function to dispense the same liquid continuously, such as when
dispensing a liquid on a microplate, etc. The operation consists of aspirating one time
and dispensing several times.
A
spirate
Dispense
Discharge the
remaining
li
q
uid