37
・Reverse the removal procedure to reattach the
lower part.
Use caution near objects affected by strong
magnetic fields as the magnet is powerful.
13-2 Cleaning the tip holder
The outer part of the tip holder can be cleaned by simple removal of the ejector.
The tip holder should be cleaned with 60% isopropyl alcohol, 70% ethanol, or a
neutral detergent.
Please refrain from loosening or further disassembling the tip holder as this leads to
debris becoming attached to the inner parts degrading performance of the device.
Push both sides of the ejector inward and pull the ejector down to remove.
Lower part
of pipette
Piston rod
Magnet
MPB
MPA
MPB
Tip holder
Ejector
Ejector
Tip holde
To Next Page
Loading...