AND MPA-10 - 8 Name and Functions of Display and Keys; Display and Functions

16
8. NAME AND FUNCTIONS OF DISPLAY AND KEYS
8-1 Display and functions
Symbols Descriptions
System setting
mode
Used to set up functions before
pipetting,such as
aspirating/dispensing speed,reverse
operation, etc. (Refer to “9-4 System
setting mode (SYS)”.)
Shows the operation mode when operating the pipette.
Standard
mode
(Refer to “9-1 Standard mode
(AUTO)”.)
Multiple
dispensing
mode
(Refer to “9-2 Multiple dispensing
mode (MD)”.)
Operation
mode
display
Mixing mode
(Refer to “9-3 Mixing mode (MIX)”.)
Dispensing
amount
display
Shows the setting value of the dispensing amount.
Displays in μL, mL, or mg
Blowout
mark
Shows whether the blowout is enabled or
disabled.(Refer to “9-7 Blowout function”.)
Reverse
operation
mark
Shows reverse operation.
(Refer to “9-6 Reverse operation (Dispensing liquid that
tends to remain in the tip)”.)
Display of
number and
a number of
time
COUNT：Shows the number of times the same
operation is to be carried out.
PROG：Shows the stored number of user setting.
(Refer to “9-5 Program setting mode”.)
Operation mode
Dispensing
amount display
Blowout mark
Notice mark
Buzzer mark
Reverse operation
mark
A
spirating and
dispensing
s
p
eed dis
p
la
y
Display of number
and a number of times
Battery mark