Need help?Do you have a question about the AND MPA-10 and is the answer not in the manual?
General| Model | MPA-10 |
|---|---|
| Category | Laboratory Equipment |
| Detection Method | Absorbance |
| Interface | USB |
| Power Supply | 100-240VAC, 50/60Hz |
| Type | Microplate Reader |
| Plate Type | 96 well |
Imminently hazardous situation leading to death or serious injury.
Potentially hazardous situation leading to death or serious injury.
Potentially hazardous situation leading to minor injury or damage.
Information for correct device usage.
Safety guidelines for using the pipette.
Safety guidelines for handling the battery.
Procedure for installing the battery.
Instructions for recharging the battery.
How to change the power plug.
Identification of pipette parts and their materials.
Safety precautions to take before dispensing.
Detailed explanation of the pipette's display elements and symbols.
Explanation of the functions of each key on the pipette.
How to operate the basic pipetting mode.
How to use the mode for dispensing multiple times.
How to use the mode for mixing liquids.
How to configure system settings for pipetting.
How to save and recall custom pipette settings.
How to use reverse operation for viscous liquids.
How to use the blowout function to expel residual liquid.
How to expel all remaining liquid from the tip.
Explanation of the pre-dispensing feature for accuracy.
Overview of advanced dispensing modes like AUTO+MIX, SA, Sd.
Procedure for calibrating the dispensing volume.
How to restore default volume calibration settings.
How to dispense liquids by weight instead of volume.
How to calibrate the pipette for weight dispensing.
Procedure for replacing the lower part of the pipette.
Instructions for cleaning the tip holder.
Checks to perform after maintenance.
Charging stands and hangers for pipettes.
Details on pipette tips, tip boxes, and filters.
List of user-replaceable disposable parts.
Equipment used for inspecting pipette performance.
To Next Page