18
Figure 5.4 Full load indicator
Unloading the Trailer
To unload the TRB trailer, it is very important to choose level ground and to make sure that
there are no obstacles, such as an electrical transmission line.
Bring the trailer to a stop at the place where you want to unload the bales. Pull the control to
raise the platform. Remember that the loading arm must be around the middle of its range for
you to be able to raise the unloading platform. When the platform has been raised to its
maximum position, move forward slowly so that the bales will unload themselves onto the
ground
When all the bales have been unloaded, bring the platform back to horizontal position. The
trailer is ready to load more bales in the fields.
Full load Space available
To Next Page
Loading...
Need help?
General
