These guidelines provide a general overview; please refer to the software installation information supplied with your
software.
1. Terminate and exit any programmes which are running on the PC.
2. Insert the Andor CD. The InstallShield Wizard should now start. If it does not start automatically, run the le
setup.exe directly from the CD and follow the on-screen prompts that will guide you through the install process.
3. At the camera selection step, tick the required camera being used e.g. Andor iStar.
4. At the le save location accept the default location or alternatively click on Browse… and choose your own le
destination.
5. Follow the installation steps to completion, the progress is shown in the update progress bar.
Note in some cases you may need to restart the PC e.g. if the camera requires a PCI card.
6. The Solis icon should now be installed on your desktop. Click on this to start the application.
To Next Page
Loading...