Andor Technology Shamrock 500i - Installation of Accessory Parts

Shamrock 500i & 750
33
Version 2.1 rev 13 Feb 2017
11. Now enter the grating and blaze values for the new turret as shown below.
3.5
inStallation of acceSSory partS
PLEASE CONTACT CUSTOMER SUPPORT FOR INFORMATION AND GUIDANCE ON THE INSTALLATION OF
ACCESSORY PARTS.
Entering the new turret values
• Enter values for:
- No of gratings
- Grating lines/mm
- Grating blaze (nm)
• Grating Start should be left with the default values.
• When complete select the Active Turret (turret number you
wish to use)
• Click “OK” when nished.