48
r. Assemble the Brackets (items 12 and 13) to the front left and right side of the base using 5/8"
hardware (items 19, 20 and 21). Tighten to 150 foot Pounds.
s. After antenna is positioned to pedestal, remove the aft shipping beam from the antenna base and
retain hardware with beam.
Remove eye nuts and hardware from feed support and retain hardware.
t. Items supplied in the Antenna Lift Kit are to be returned to Andrew Canada Inc. in original shipping
crate.
The equipment components of major size and/or weight have now been lifted onto the tower. The
crane can now be released.
To Next Page
Loading...
Need help?
General
