ES
FR
DE
GB
IT
C13148123_GB.fIDM
English
-
39
-
Use and installation manual
7–Press the button. >>>
To modify the cooking parameters, proceed as de-
scribed in point ""Manual cooking" mode" ( see page
18).
The cooking mode, the chamber temperature and
the time/core temperature can be quickly changed by
using the knob.
During cooking, except for C3 cooking modes, press:
- the knob once and turn it to change the tempera-
ture of the cooking chamber; press the knob to con-
firm the change.
- the knob twice and turn it to change the cooking time
or the core temperature; press the knob to confirm the
change.
- the knob three times and turn it to change the cook-
ing mode (convection, steam or mixe d); press the
knob to confirm the change.
Turn the knob to change the % of moisture (mixed) or
the % of the outlet opening (convection).
The cooking cycle stops automatically at the end of
the set time or when the "product core probe" detects
the set temperature. At the end of the cooking cycle
a beeper sounds and the light inside the cooking
chamber goes out.
Press the button (E) or open the door to stop the
cooking cycle before the set time. The appliance re-
mains powered up. To turn off the electricity supply,
press the button (G).
To Next Page
Loading...
Need help?
General