ES
FR
DE
GB
IT
C13148122_GB.fIDM
English
-
5
-
Use and installation manual
Although the appliance is complete with all safety devices, during installation and con-
nection additional devices must be added if necessary to comply with the relevant le-
gal requirements.
Make a daily check that the safety devices are properly installed and in good
working order.
See chart at back of manual for the position of the signs provided.
The appliance is delivered complete with the following:
Voltage conversion kit: for adapting the appliance to the type of voltage to be used
(for model "FX 82 " only).
The appliance can be equipped with the following accessories on request (see“gener-
al catalogue").
–During design and construction, the constructor has paid special attention to factors
which may cause risks to the health and safety o f the people interacting with the
appliance. As well as complying with the relative legal requirements, he has adopted
all the "rules of good construction practice”. This information is provided to encourage
users to take special care in or der to prevent all risks. However, there is no
replacement for care and attention. Safety also depends on all the operators who
interact with the appliance.
–Read the instructions provided in the manual supplied and those applied directly to
the appliance with care, and comply with safe instructions in particular.
–Take care not to knock or drop the appliance during transport, handling and installa-
tion, to avoid damage to its components.
–Never tamper with, elude, eliminate or bypass the safety devices installed. Failure to
comply with this rule may cause serious risks to health and safety.
–Even after you have read all the appropriate documentation, if necessary on first use
carry out a few trial operations to get to know the controls, especially those used for
switching on and off, and their main functions.
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
SAFETY
3
GENERAL SAFETY PRECAUTIONS