Page 17 of 24
Refit the filter (or replace it with a new one) into the Filter Holder.
At the same time as cleaning the fabric filter, it is a good idea to clean the filter
holder and the metal filter.
To do this, grasp the wire handle, swing up and pull the filter holder straight up
and out.
Remove the inner section by grasping the tabs with your fingers, and rotate it
anti-clockwise to unlock and lift up and out.
Wash these components in warm mild soapy water, rinse in clean fresh cold
water and let it completely dry.
These parts may be scrubbed clean, however, DO NOT place them in a
dishwasher.
DO NOT use a hairdryer to dry these components.
When completely dry, refit in the opposite order of disassembly.
To Next Page
Loading...
