Page 18 of 24
Note: The filter holder can only be fitted in one orientation. Align the tabs on
the side of the filter holder with the mating slots in the dust canister then slide
down.
DO NOT force it in. If it will not drop in easily, check the alignment of the tabs.
10.2 Cleaning Dust Canister
Remove the dust canister as described previously and remove the filter and
filter holder as described previously.
Wash the dust canister in warm mild soapy water, rinse in clean fresh cold
water and let completely dry.
DO NOT scrub the dust canister or place it in a dishwasher.
DO NOT use a hairdryer to dry the dust canister.
Reassemble and Refit the filter and filter holder to the dust canister as
described previously, then refit the dust canister to the vacuum cleaner
as
described previously.
To Next Page
Loading...
