UNION SWITCH & SIGNAL Microlok II System Startup, Troubleshooting, and Maintenance
1-2 September 2000 SM-6800C Rev. 2.5
• Chapter 8 provides schedules and procedures for performing inspections and preventive
maintenance procedures on the Microlok II system. These procedures are designed to
maintain the system equipment in peak operating condition and to provide a means of
detecting early signs of equipment degradation. This section also contains corrective
maintenance procedures for the Microlok II system. These procedures describe how to
replace modular components of the system following troubleshooting operations.
For reference, related Microlok II system manuals include:
• SM-6800A - Microlok II System Description
• SM-6800B - Microlok II System Hardware Installation
• SM-6800D - Microlok II System Application Logic Programming
Other manuals that provide information on related US&S systems include:
• SM-6700A - GENISYS
-2000 Multi-Purpose Non-vital Control/Communications
System (Application Logic Programming)
• SM-6470A - MicroTrax
Coded Track Circuit System Application Logic Programming
• SM-6470B - MicroTrax Coded Track Circuit System Hardware Installation and
Configuration
• SM-6700B - GENISYS-2000 Multi-Purpose Non-vital Control/Communications System
Hardware Installation and Configuration
This manual is divided into chapters, each of which stands alone in the presentation of the
subject matter. Thus, any chapter can be used as a quick reference to the information indicated
by the section title. However, the chapters also organized to provide a logical learning sequence.
To gain an overall understanding of the Microlok II system, read the chapters in the order
presented.
1.2 R.A.I.L. TEAM AND TECHNICAL SUPPORT
The Rapid Action Information Link (R.A.I.L.) team was created in
1996 to serve the technical needs of current and potential US&S
customers. Convenient 24-hour access and a rapid resolution to
customer problems are the trademarks of this organization. The
R.A.I.L. Team, which is staffed primarily by US&S product and
application engineers, is ready to assist and resolve any technical
issues concerning the Microlok II system or any other US&S
product.
Any questions regarding the contents of this service manual should
be directed to the R.A.I.L. Team by telephone at 1-800-652-7276 or
through Internet E-mail at railteam@switch.com.
To Next Page
Loading...
Need help?
General